4907 Lakeshore Drive
Conforme
Aucune infraction n'a été relevée lors de la dernière inspection.
Source : Alberta Health Services Environmental Public Health
Ce restaurant a été inspecté 3 fois depuis le 21 avril 2026, avec 1 conforme, 1 non conforme et 1 fermeture au dossier.
Aucune infraction
2 infractions
: wall board behind the front hand sink has been sealed. The wall board by the Pepsi cooler still needs joints sealed. , , 1. Wall board has been installed that has several joints and screws. Some edges are pulling away from the wall and there are gaps around an electrical outlet. Water can get behind the wall at the joints and around the outlet which could lead to mold growth or an electrical hazard. , , 2. There is a counter and sink cupboard that have exposed particle board that is difficult to clean and is absorbent. , 3. The food counter in the back area by the door has paint on it. , , Have all wall joints sealed and walls smooth, non-absorbent and easily cleanable. Ensure particle board is sealed and non-absorbent. Have paint removed. , , If screws are found to be difficult to clean and trapping dirt/debris, the wall material will need to be replaced.
Ce dossier provient d'Alberta Health Services Environmental Public Health, qui inspecte les établissements alimentaires partout en Alberta. Les inspecteurs notent toute infraction aux règlements sanitaires applicables à chaque visite. Le résultat ci-dessus correspond à la dernière inspection au dossier.
« Conforme » signifie qu'aucune infraction n'était en suspens lors de cette visite. « Non conforme » signifie qu'une ou plusieurs infractions n'ont pas été corrigées sur place. « Fermé » signifie que l'inspecteur a ordonné l'arrêt du service à la clientèle jusqu'à la correction des problèmes.
Update: cooler seals were improved, but cooler was holding at 6.7 C. , , 1. There is a 3-door cooler that was at 9.9 C and needs a new seal on one door. Operator indicated it may not be used and may be removed. , , 2. There is condensation occurring in the walk-in freezer forming ice buildup. Non-potable ice can contaminate food stored below. Ensure the fans are not leaking and remove ice. , , Provide any service documentation for the freezer., Please repair the seal and adjust the temperature or remove the unit if not keeping it.
3 infractions
The back screen door has gaps along the screening that will allow pests to enter. , , Ensure the screen door is tightly sealed and pest proof.
1. Wall board has been installed that has several joints and screws. Some edges are pulling away from the wall and there are gaps around an electrical outlet. Water can get behind the wall at the joints and around the outlet which could lead to mold growth or an electrical hazard. , , 2. There is a counter and sink cupboard that have exposed particle board that is difficult to clean and is absorbent. , 3. The food counter in the back area by the door has paint on it. , , Have all wall joints sealed and walls smooth, non-absorbent and easily cleanable. Ensure particle board is sealed and non-absorbent. Have paint removed. , , If screws are found to be difficult to clean and trapping dirt/debris, the wall material will need to be replaced.
1. There is a 3-door cooler that was at 9.9 C and needs a new seal on one door. Operator indicated it may not be used and may be removed. , , 2. There is condensation occurring in the walk-in freezer forming ice buildup. Non-potable ice can contaminate food stored below. Ensure the fans are not leaking and remove ice. , , Provide any service documentation for the freezer., Please repair the seal and adjust the temperature or remove the unit if not keeping it.