205 - 1133 137 Avenue SE · DEER RIDGE
20 mai 2026
Non conforme1) There were gaps at the top of the baseboard to the wall at corners., -fill the gaps with caulk or another durable material.
Buster's Pizza & Donair se trouve dans le quartier DEER RIDGE. DEER RIDGE, Calgary compte 49 restaurants suivis sur Pass or Fail, inspectés par Alberta Health Services Environmental Public Health. En date du 22 mai 2026, 45 (92%) d'entre eux étaient Conformes lors de leur dernière inspection, sans Non conforme ni fermeture.
Ce restaurant a été inspecté 4 fois depuis le 6 mai 2026, avec 1 conforme, 2 non conformes et 1 fermeture au dossier.
1) There were gaps at the top of the baseboard to the wall at corners., -fill the gaps with caulk or another durable material.
Ce dossier provient d'Alberta Health Services Environmental Public Health, qui inspecte les établissements alimentaires partout en Alberta. Les inspecteurs notent toute infraction aux règlements sanitaires applicables à chaque visite. Le résultat ci-dessus correspond à la dernière inspection au dossier.
« Conforme » signifie qu'aucune infraction n'était en suspens lors de cette visite. « Non conforme » signifie qu'une ou plusieurs infractions n'ont pas été corrigées sur place. « Fermé » signifie que l'inspecteur a ordonné l'arrêt du service à la clientèle jusqu'à la correction des problèmes.
DEER RIDGE
The large can opener cutting blade was dirty with sauce debris., -clean and sanitize all food contact equipment after use.
Front service cooler measured 12Celsius (condenser malfunction earlier today)., -repair/replace the condenser and ensure it can maintain 4Celsius or less.
1) There were gaps between the baseboard and the wall. The baseboards were not secure to the wall and served no purpose as they were poorly installed., -replace baseboards and install properly, , 2) There was a gap between the floor/wall interface behind the cooking equipment., , , 3) The condensers in walk-in cooler and freezer had a bucket to catch the condensate., -install the condensers according to code and manufacturer's instructions (Verified with Technical Assistance center with Plumbing and Gas inspections)., , 4) Walls in the cooler and freezer were covered in plastic., -remove all plastic, which will lift and pull caulk, so that will need to be redone too., , 5) Prep tables had gaps and loose caulk at edges. , -Remove caulk, clean and sanitize, then re-caulk with a product safe for food-contact., , 6) Final construction wasn't completed (painting, bathroom, etc)., -complete all work; thoroughly clean food premises.
The large can opener cutting blade was dirty with sauce debris., -clean and sanitize all food contact equipment after use.
Front service cooler measured 12Celsius (condenser malfunction earlier today)., -repair/replace the condenser and ensure it can maintain 4Celsius or less.
1) There were gaps between the baseboard and the wall. The baseboards were not secure to the wall and served no purpose as they were poorly installed., -replace baseboards and install properly, , 2) There was a gap between the floor/wall interface behind the cooking equipment., , , 3) The condensers in walk-in cooler and freezer had a bucket to catch the condensate., -install the condensers according to code and manufacturer's instructions (Verified with Technical Assistance center with Plumbing and Gas inspections)., , 4) Walls in the cooler and freezer were covered in plastic., -remove all plastic, which will lift and pull caulk, so that will need to be redone too., , 5) Prep tables had gaps and loose caulk at edges. , -Remove caulk, clean and sanitize, then re-caulk with a product safe for food-contact., , 6) Final construction wasn't completed (painting, bathroom, etc)., -complete all work; thoroughly clean food premises.